Skid Steer Attachments

Clear away snow quickly and efficiently by utilizing your skid loader's power with this snow bucket. Our snow buckets are well built with a reversible cutting edge that gives the attachment a much longer life span.  

Features

• Reversible cutting edge for a much longer life span
• The bucket has a high volume for a large moving capacity
• The bucket is constructed with 3/16" thick steel
• Contact us if you would like a custom size

Specifications

• Dimensions on snow bucket: all are 36" high and 42" deep
• All come with 3/4 "x6" bolt-on reversible cutting edges
• 8' snow bucket holds 1.8 cubic yards
• Available in 6', 7', 8', 9, 10' widths
• End plate thickness: 5/16" thick steel 

Low Pro Snow Pro Commercial Grade Snow Buckets are available in 7' and 8' widths, and our pricing includes the ¾" bolt-on removable/reversible cutting edge for these as well! This bucket is the same volume as the high-capacity snow bucket. We just make it low profile for increased visibility for those who want to see that cutting edge in your machine! 

Features

• Reversible cutting edge for a much longer life span
• The bucket has a high volume for a large moving capacity
• The bucket is constructed with 3/16" thick steel
• Contact us if you would like a custom size

Specifications

• All come with 3/4" x 6" bolt-on reversible cutting edges  
• 8' snow bucket holds 1.8 cubic yards  
• Available in 7', 8' widths  
• End plate thickness 5/16"
• 1/2" support straps throughout

Meant for clearing a small parking lot or a large-scale commercial operation, this is the pusher for you! Available in 8′ and 10′ models, this pusher is constructed with a stiff square 1/4″ wall tube frame and 3/16" plow material making this an industrial grade heavy-duty snow pusher to run with the best of them. It comes with a 1/2" adjustable and replaceable cutting edge and replaceable grade 50 steel 1" shoes. This pusher is built for a beating! We also bend the extra material in our larger press brake to gain huge volume over our competitors (see photos). We won't nickel and dime you for some bogus screen that allows the snow to come up and over or through.

Features

• 8' and 10′ standard sizes
• Grade 50 steel cutting edge for extended life
• Free floating skid plates make it easy to use
• Optional back drag allows you to get close to buildings and pull backward to make clean-up easy
• 1" grade 50 shoes for industrial-grade performance

Our X-treme Skid Steer Snow Plow allows you to clear driveways and parking lots efficiently. Easily angle the plow from within your cab using the 3" x 6" hydraulic cylinder. The top of the plow is rolled to keep the snow from coming back toward the cab. It's ½" bolt-on cutting edge, and adjustable snow shoes are standard.

The CID snow plow also has a spring-loaded tripping feature in case you hit cracks or strike other things on the road, driveways, or parking lots. You can easily move the plow along the ground with the adjustable skid shoes.

Specifications 

• Easily angle the plow from inside the cab
• 3" x 6" hydraulic cylinder
• ½" AR400 bolt-on cutting edge
• Adjustable skid shoe
• 30-degree angles
• Available Sizes: 72", 84", 96", 108″, 120″

Our X-treme Skid Steer Snow Pusher allows you to clear a parking lot quicker than a snow plow. The snow pusher edge is 1 ½" thick x 8" wide, adjustable, reversible, and replaceable rubber so that you won't tear up the pavement. The moldboard is ¼", and the sides are 3/8" thick for extra support. We also offer an optional bucket lip mount, making it easy to pull snow away from buildings and sidewalks. 

Specifications

• 1 ½" thick x 8" wide replaceable rubber edge protects pavement
• 1″ thick AR400 skid shoe
• 3/8" thick sides for extra support
• Bucket lip mount available
• Optional steel edge
• Available sizes: 72", 84", 96", 108″, 120″

Features

• Industrial grade, professionally engineered
• 6-1/2' or 8-1/2' digging capacity
• 12" or 18" wide commercial grade bucket with 1" grade 50
• Replaceable digging teeth
• Recessed cylinder protection
• Optional mechanical thumb for gripping debris
• Can be modified to fit front-end loaders as well

Specifications

• Bucket width: 12" or 18"
• Dig depth: 6-1/2' or 8 1/2'
• Cylinder: 3000 PSI that is 3.5 x 16
• Cutting edge: 1/2" weld on with supports and 1" Pivots
• Weight: 575-775 

Features

Our X-treme Skid Steer Swing Arm Backhoe attachment is an excellent tool for digging ditches, removing stumps, and digging footings. It can be used for many jobs such as excavation, landscaping, nursery, septic, power, and water line installation.  

Specifications

• 110-degree swing right or left
• Powered by an American-made 3" x 16" boom cylinder and swing 3" x 6" cylinder
• Available bucket sizes: 8", 12", 16", 20", 24"
• Optional 8-pin or 14-pin universal wiring harnesses are available

Prime Cyclops Solo Grapple is available for those of you with smaller skid steers that want a lighter weight option and still have the commercial grade heavy-duty built grapple rating!

Features

• Domestic Parker hoses and fittings
• Full quick attach plate
• Bolt-on removable side plates
• Commercial grade steel
• Reinforced outside tines
• All pivot points are greasable
• Precise visibility cutouts
• Optional bolt-on cylinder cover

Specifications

• Common Sizes: 48" and 52"
• Heavy Duty, Weight 48" 500lbs  52" 550lbs
• Light Duty ,Weight 48" 700lbs  52" 750lbs
• Spacing Between Tines: 3"
• Steel Tine Width: 3/8"  Heavy Duty
• Steel Tine Width: 1/4"  Light Duty
• Side Plate Width: 3/8"
• Grade 50 Cutting Edge: 1/2"

The rock and brush grapple has a similar base as the rock bucket, except it has two 3,000 psi independent working cylinders for grabbing objects. The 3/8" material with 3" spacing between tines enables dirt to fall through while holding on to the larger loads. The 1/2" grade 50 hardened cutting edge provides additional strength to the tines so you can easily grab and move material securely with our all-reinforced outside tines and all greaseable pivot points. Add cylinder covers to protect that cylinder up to 95%!

Features

• Domestic Parker hoses and fittings
• Full quick attach plates
• Bolt-on removable side plates
• Commercial grade steel
• Reinforced outside tines
• All pivot points are greasable
• Precise visibility cutouts
• Optional bolt-on cylinder covers

Specifications

• Common sizes: 62", 68", 74", 78", and 84"

Commercial duty weight:

• 68" 980 lbs
• 74" 965 lbs
• 78" 1100 lbs
• 84" 1175 lbs

Heavy duty weight:

• 62" 850 lbs
• 68" 905 lbs
• 74" 965 lbs
• 78" 1025 lbs
• 84" 1100 lbs

Light duty weight:

• 62" 585 lbs
• 68" 600 lbs
• 74" 620 lbs
• 78" 640 lbs
• 84" 680 lbs
• Spacing between tines: 3"
• Side plate width: 1/2" CD 3/8" HD 1/4" LD
• Steel tine width: 3/8" CD & HD 1/4" LD
• Grade 50 cutting edge: 1/2"

The Prime Industrial Clam/Brush Grapple is an absolute "beast mode" style grapple made for multi-purpose use. Clean up brush, dig out roots, large rocks, concrete work, logs, and more! It features a large 51" bite with two 3,000 PSI hydraulic cylinders and serrated teeth designed for clamping power. The replaceable digging/excavator teeth make this a popular grapple because of the versatility it brings to the job site. We don't mess around like others and cut corners with cheap foreign hoses. We use Domestic Parker hoses and fittings! It comes with universal flat-faced couplers (unless other requested). It can be adapted to your tractor or loader as well.

Features

• Domestic Parker hoses and fittings
• Full quick attach plates
• Commercial grade steel
• All pivot points are greasable
• Replaceable digging/excavator performance teeth
• Reinforced gusseted tines
• Universal flat-faced couplers

Specifications

• Common Sizes: 66", 74", and 82"
• 3/4" Grade 50 steel bottom tines
• 1/2" Grade 50 steel top tines
• Fully gusseted frame top and bottom
• Massive 51" opening to get the job done
• 2x 3,000 PSI Hydraulic Cylinders for bite
• Serrated teeth on clam to hold in debris of all kinds

This grapple is nothing short of a monster. The bucket bottom is all ¾" grade 50 steel with approx. 12" of spacing between the tines. The cutting edge is a ½" grade 50 steel, and the massive grapples coming over the top are also ½" grade 50. We overkill this grapple for the big dog skid steers like our Bobcat T770 and put this thing to the test! Serrated teeth on grapples for added grip, all greaseable pivot points, domestic Parker hoses, Parker fittings, and Parker couplers. Grapple opening at 52 ½".  

Features

• Domestic Parker hoses and fittings
• Full quick attach plates
• Commercial grade steel
• All pivot points are greasable
• Massive 52 ½" opening
• Serrated grapple teeth

Specifications

• Common sizes: 74" and 84"
• Spacing: 12"
• Length: 38.5"
• Height: 38"
• Edge: 1/2" G50
• Weight: 1,200 lbs and 1,300 lbs

Our CID Skid Steer Grapple Buckets are very versatile attachments. They're all great choices for anyone that owns a skid steer, compact track loader, and compact tractor. Available in many sizes, they easily pick up logs, rocks, leftover building supplies, or any other type of debris. It's just an all-around good general-use grapple bucket. 

Features

All Grapple Buckets have 2" bore and 10" stroke cylinders, with all hydraulic lines routed inside the tubing to prevent tears. Every grapple bucket exceeds the lifting capacity of the skid steer machine it is attached to. It is also built with top-quality steel, oversized points, and bushings, with grease fittings at every pivot point.

Specifications

• 2" bore by 10" stroke cylinders, rated at 4000 PSI
• Grease fittings at every pivot point
• Optional weld-on teeth and bolt-on cylinder rod cover kit
• Compact tractor sizes: 60", 66", 72"
• Standard duty sizes: 63", 72"
• Heavy duty sizes: 63", 66", 72", 78", 81"
• Up to 35 HP on compact tractor
• Up to 45 HP on standard duty
• Up to 65 HP on heavy duty

The X-treme Skid Steer Grapple Bucket attachment is ideal for picking up logs, rocks, leftover building supplies, or any other type of debris. It can handle more material and is intended for larger machines (65 HP and up) than our Heavy Duty Skid Steer Grapple Bucket.

Features

It features 2" bore by 10" stroke cylinders that operate independently to adjust for uneven loads. The hydraulic lines are routed inside the tubing to prevent tears. It is also built with top-quality steel, oversized points, and bushings. Grease fittings at every pivot point. The X-treme Grapple Bucket Attachment has a 1"x6" cutting edge. Every unit exceeds the lifting capacity of the skid steer machine it is attached to.

Specifications

• 2" bore by 10" stroke cylinders that operate independently, rated at 4000 PSI
• 5/8″ top tines
• Hydraulic lines on top & routed inside the tubing to prevent tears
• Grease fittings at every pivot point
• Bucket has a 1"x8" cutting edge
• Bolt-on sides included
• Optional weld-on teeth
• Optional bolt-on edge
• Available Sizes: 66", 72", 78", 81″, 84", 96"
• 65 HP and up

Our Skid Steer Heavy Duty Rock Grapple is great for sifting through dirt to remove rocks, debris, and other material. With the tines set at 2 ½" apart, you pick up almost everything but the dirt. You can also pick up large rocks, logs, brush, or just about anything else by use of the grapples that can close at various gaps to handle irregular shapes.

Specifications

• Great for sifting dirt to remove rocks
• 2" bore by 10" stroke cylinders
• Available Sizes: 63", 66″, 72", 81", 84"
• Bolt-on sides included
• 3/4 x 6 cutting edge
• Optional weld-on teeth with 1 x 6 cutting edge

Our Standard Duty Root Grapple is built from a 3/8" thick steel plate on the top and bottom. We also incorporate 3" square tubing to prevent tears in the hydraulic lines. We put sleeves on the hoses and route them inside the tubing. These things add longevity to the CID standard duty root grapple.

Specifications

• Recommended machine sizes: 35 – 45 HP
• 3/8" thick steel plate on the top and bottom
• 2" bore by 10" stroke cylinders
• 3" square tubing
• Hydraulic lines routed inside the tubing to prevent tears
• Optional spacer tines
• Available Sizes: 63", 66", 72"

Features

• Weld-on push bar included (as pictured)
• Industry-leading Omni Gear Box
• Flo Torq standard flow commercial grade motor
• 3" up to 6" rated material pending application
• Professionally spun stump jumper in addition to hardened blades

Specifications

• Fully hand-welded commercial grade decking with full warranty
• Full-length 3/8" runners on the bottom drastically extend the life of the mower
• Extra 1/2" motor support and stabilizer
• 15-25 gallons per minute

Brush Mower

At Prime, we continue to outpace our competitors on quality for the price, which will always be our goal! We will keep bringing you attachments that we would want and do use ourselves that are professionally engineered commercial and industrial grade!

We offer three lines of industrial-grade brush mowers with design adjustments to fit your needs. All our brush mowers come with a standard flow of 15 to 25 gallons per minute. They are fitted with professionally spun stump jumpers and hardened blades.

All our decks are made with commercial-grade quality, and we hands-down outperform the competition because our motor is directly mounted to the industry-leading Omni Gear Box. Simply put, you can't beat it for the money!

Option #1: Rigid Mount Brush Mower (most common)

Option #2: Free Floating Deck

*Features a free floating deck

Option #3: pick either design and ramp up to the US industry-leading Permco motor

Our Standard Duty Skid Steer Brush Cutter attachment has a 60" or 72" mowing deck. It features a 40 HP gearbox and stump jumper. A flow of 11-20 GPM is required. An optional mesh grill is available on the open-front model. The Standard Duty Brush Cutter is for the person who works with light brush on smaller or infrequent jobs. 

Specifications

• 3" Cutting Capacity
• 3/16" Deck with 3/8" A36 reinforced sides
• 40 HP Right Angle gearbox
• Two blades with stump jumper
• High torque motor with 3000 PSI relief valve
• Does not require a case drain
• Optional mesh grill available on open front

Our X-Treme Skid Steer Brush Cutter attachment is ideal for challenging clearing applications. The cutter comes in a 60", 72", or 78″ cutting width. It is equipped with bidirectional blades, powered by a high torque motor, and features a 100 hp Omni gearbox. We offer flows of 14-20 GPM and 20-30 GPM. These brush cutters do not require case drains. The one-year warranty does not cover the blades or hoses.

Specifications

• 6" cutting capacity
• 3/16" deck with sides reinforced with 3/8" AR400
• High torque Parker motor
• Three bidirectional blades made with 5/8" AR400
• Does not require a case drain
• Available in 60", 72", or 78" cutting width
• 3/8″ double clover leaf-shaped blade holder
• 100 HP right angle gearbox with six-bolt flange
• 1/4" deck optional upgrade
• Optional mulching teeth

Our X-treme Skid Steer Piston Motor Brush Cutter attachment is used in forestry and industrial land-clearing operations. The Piston Motor X-treme Duty brush cutter is our most powerful series, with many different configurations and options available.

The cutter comes in a 60", 72",  78", or 84" cutting width. It has bidirectional blades powered by a high torque direct drive piston motor and bearing housing. We offer flows of 17-27 GPM, 27-35 GPM, and 30-48 GPM. These brush cutters require case drains.

Specifications

• 7" cutting capacity
• 1/4" deck with sides reinforced with 3/8" AR400
• Piston motor direct drive
• Three bidirectional blades made with 5/8" AR400
• Requires a case drain
• Available in 60", 72",  78", or 84" cutting width
• 1/2" Double clover leaf-shaped blade holder
• Optional mulching teeth

The CID Swing Boom Cutter has a reach of 96” when extended horizontally and a vertical reach of sixteen feet, it makes clearing unwanted tree limbs less of a hassle. The cutter will also swing to the right and can be used as a side cutter. It is powered by a high-torque motor with a built-in relief valve with a maximum supply pressure of 4,000 PSI. A flow of 14-20 GPM is required.

Specifications

• Reach advantage over our typical brush cutter
• Can be used as a side cutter
• High torque motor with built-in relief valve
• Maximum supply pressure of 4,000 PSI
• 3″ x 16″ tilt cylinders
• 5/8″ AR400 blades
• 44″ cut
• 3″ cutting capacity
• Does not requires a case drain
• Optional universal, 8 pins or 14-pin wiring harnesses are available

Our Piston Motor Swing Boom Cutter is a great implement to add to your collection. It is designed for cutting banks, right of way, and fence lines. The cutter also works great for clearing pond banks and cutting trails. This cutter has a significant reach advantage over our typical cutter.

With a reach of 96” when extended horizontally and a vertical reach of sixteen feet, it makes clearing unwanted tree limbs less of a hassle. The cutter will also swing to the right and can be used as a side cutter. It is powered by a direct drive piston motor with a bearing housing with a 4000 Max PSI. A flow of 17-27 GPM is required.

Specifications   

• Reach advantage over our typical cutter
• Can be used as a side cutter
• Direct drive piston motor with Max 4000 PSI
• 3″ x 16″ tilt cylinders
• 5/8″ AR400 blades
• 44″ cut
• 4″ cutting capacity
• Requires case drain
• Optional universal, 8 pins or 14-pin wiring harnesses are available

Features

• Domestic Parker hoses and fittings
• Commercial grade steel
• Planetary drive

Specifications

• Low-speed pump motor
• Hex shaft
• Bit sizes 9" to 30"

Hole Auger

The Prime hole auger is a commercial-duty unit with a low-speed motor that cuts through the toughest ground. Six bit sizes are available, 9" through 30" post hole auger in Beaver Dam.

Specifications

• Direct drive through planetary gear
• Mounting plate, hoses, and couplings included
• Various auger bit sizes and styles are available
• Heavy-duty output shaft
• Capable of driving up to 48" bit

Hole Auger

The CID X-Treme Skid Steer Auger attachment has become an essential tool in the skid steer attachment industry. Over the centuries, the auger has been associated with "back-breaking work," and as time has evolved, so have the tools. It is no longer a physically demanding, labor-intensive device.

Just climb in your skid steer and let the skid steer auger do the work for you. No more manual labor or sweating when you have this attachment around! It can tackle the many soil conditions in the most demanding environment effortlessly and efficiently. With various bits and sizes, you can rest assured that the CID X-treme skid steer auger attachment can get the job done for you.

Features

• US Domestic Muncie Motor
• 32" stainless and poly bristles
• Completely standard flow up to 25 GPM
• Hydraulic and manual options
• Electrical connection per your machine specifically or remote control available. (Most models available 8, 12 pins, etc.)
• 5', 6', 7', and 8' widths available
• Full universal quick attach plate
• Commercial grade steel

Power Sweeper

The Prime Attachments Commercial Grade Power Sweeper is the best way to quickly clean up snow, dirt, mud, and more that has built up on asphalt and concrete. We like to give our customers options that they need, so we offer a manual rotation and a hydraulic/electric rotation. One big feature is the emphasis on solid welding the frame and sides (no cheap bolt patterns here).

Features

The CID Skid Steer Pick-Up Broom allows for added efficiency while cleaning. Whether sweeping dirt, light snow, or other debris, our Pick-Up Broom will quickly tackle the job. The 8" Hub and 26" wafers sweep material into the bucket, and the manual hinging broom allows easy transfer and disposal. Our Pick-Up Broom has adjustable height to allow for different scenarios and wear. Replaceable bolt-on edge included; rubber edge optional. 

Specifications

• Available in poly, wire, or mix
• Replaceable bolt-on edge
• Optional rubber edge
• Adjustable height
• Available in 72" or 84" widths

Features

• Domestic Parker hoses and fittings
• Pulls trees up to 11" and beyond
• Four reinforced 5/16 gussets that extend the full length of the teeth for added support
• Bolt-on removable cylinder guard
• Aggressive teeth hardened grade 50 steel designed for saplings up to 12" diameter tree
• Commercial grade steel
• Optional bolt-on debris screen 
• Optional bolt-on push bar
• Fully greaseable pivot points
• Commercial duty and heavy duty models available

Specifications

• Jaw opening: 17 inches 
• Cylinder strength: 3,000 lbs
• Teeth size: 1/2 inch 
• Commercial duty weight: 450 lbs
• Heavy duty weight: 380 lbs

Features

Prime's Rock and Stump Ripper is a beast for ripping out old stumps and pesky rocks in the field. We are the only manufacturer we've seen with the triple 1" grade 50 gusset design. We are currently in the works on a patent for this attachment! We triple-pass hand weld this ripper for max digging power when jamming in the ground to support the weight of your skid steer or loader.

Specifications

• 1" grade 50 triple gusset design
• 1/2" support plate welded behind gussets
• Triple-pass welding, 50+ years combined experience
• Serrated teeth for maximum digging
• 1/2" cutting edge gusset support for root extraction
• Enhanced 3/8" quick attach plate for support

The CID X-treme Manual Rotating Tree Saw is a helpful attachment in land management. From clearing undergrowth to cutting out small trees, these attachments will leave your land looking like it should.

The manual rotating is new for 2019 and provides a 90-degree rotation in either direction. Hydraulics on both models are routed through the boom for protection. Both models have a ½" AR400 blade holder and 15x high strength, four-sided cutting teeth.

Specifications

• 17 to 23 GPM and does not require a case drain
• 20 to 30 GPM, piston motor, and requires a case drain
• The blade holder is ½" AR400
• Fifteen high-strength, four-sided cutting teeth

The CID Skid Steer Tree Spade is an essential tool in the landscaping, lawn care, and nursery industry. It can easily dig out stumps, transplant trees, or dig trenches on job and construction sites. This tree attachment can eliminate the back-breaking work that typically comes with this project.

Our CID Tree Spade is made from abrasion-resistant ¼" AR400 material to make it a longer-lasting product. The front edge is beveled to give a sharp penetrating edge for digging in different types of soils. This spade attachment is offered in 40" and 48" sizes.

Specifications

• Made with ¼" AR400 Material
• Front Beveled Edge
• Available sizes: 40", 48"

Our X-treme Tree Shear has a 5" bore cylinder that can generate up to 30 tons of shearing force. It is constructed with a 1" thick AR400 blade, which allows you to cut up to 12" diameter trees and logs.

The CID tree shear design forces trees to fall consistently to the right, allowing the operator to accurately position where the tree will land. Our skid steer X-treme tree shear can also be used as a skidder to pull the logs out of the woods after being cut.

If this tree shear still doesn't do enough for you, CID attachments also offer an even more versatile tree shear. The X-treme rotating tree shear not only cuts trees but also skids them and can be used to cut them into smaller logs by rotating the blade 90 degrees. This can be done hydraulically or manually, depending on the model you choose. 

Specifications

• 1" thick AR400 blade
• 30 tons of shearing force
• Capable of cutting 12" trees
• Powered by a 5"x12" cylinder

Our X-treme Rotating Tree Shear is constructed with a 1' thick AR400 blade, which allows you to cut up to 12" diameter trees and logs. It has a 5" bore cylinder that can generate up to 30 tons of shearing force. The CID X-treme Rotating Tree Shear features a 90-degree rotation that is offered in manual or hydraulic. (Note: the manual is a two-person operation.)

Its design forces trees to fall consistently to the right, allowing the operator to accurately position where the tree will land. If you want to save a little more money, we also offer a non-rotating tree shear for the person who only needs to cut the trees down and skid them out of the woods.

Specifications

• 1" thick AR400 blade
• 40 tons of shearing force
• Capable of cutting 12" trees
• Hydraulic tree shear powered by a 5" x 12" cylinder
• 90-degree rotation offered in manual or hydraulic
• Optional 8-pin or 14-pin universal wiring harnesses are available

Our X-treme Skid Steer Stump Grapple is made from ½" top quality plate and features a 1" cutting edge, replaceable teeth, and a 3/8" hose. Not only can you dig out stumps, rocks, and other materials, but you can also carry them away afterward. There is no need to have another attachment for loading the stump into your dump truck or moving the stump to a burn pile. 

Specifications

• Made from 1/2" top quality plate
• 1" cutting edge
• Replaceable teeth
• Easily transports stumps
• 2"x10" cylinder
• 3"x3/8" wear bars

The Heavy Duty Skid Steer Stump Bucket is an excellent addition to your skid steer attachments. Easily dig around the stump and then pop it out. We have even had contractors dig house footings with the stump bucket. These stump buckets will make you more versatile in your contracting needs.

Specifications

• Great for stump removal and digging footings
• 3/8" sides, 3/4"x6" edge
• 3"x3/8" wear bars

The CID Terminator Tree and Stump Remover is an excellent addition to your landscaping arsenal. Our powerful American made 3.5″ bore cylinders provide the clamping force needed to pull 12″ trees and remove any size stump.  The Terminator boasts a total of 66 AR 400 teeth, 32 horizontal, and 34 vertical.

This attachment is great for pulling up large trees and stumps, allowing more flexibility in your forestry management.

Specifications

• Dual 3.5″ x 4″ cylinders with 1.25″ pins
• 1.5″ main pivot pins
• Replaceable 1″ x 8″ cutting edge
• 5/8th” AR400 vertical teeth
• 1″ AR400 horizontal teeth

Our pallet fork attachment is used for moving any palletized item and can be adjusted easily with the flip of a lever. It also features a walk-through design to access the skid loader cab easily. 

Specifications 

• 4-foot-wide carriage
• 48" forks rated at 5,500 lbs
• Adjustable widths with locking lever
• Hardened forks
• Fork lengths: 48 and 60 inches 
• Carriage width: 4 and 5 ft 
• Load rating: 5,500 lbs

The Prime Attachments Hydraulic Sliding Pallet Fork is made to outlast others. Along with the walk-through design, we take the time to professionally mill our 1 1/4″ slider bar on top that is met with a 1/2″ welded T-design for added strength. This adds a huge difference compared to a cheap set of pallet forks. The bottom rail is also designed to outlast the competitors with a reinforced professionally milled 1/2″ T-design, specifically not a cheap 1/2" bent piece that will wear out over time. Like our regular walk-through pallet forks, we only offer the big dogs at a 5,500 lbs capacity rating.

Specifications  

• Professionally milled slider bars
• Hydraulic adjustable forks
• 4' and 5' Carriage options
• 48" and 60" 5,500 lbs pallet fork options
• Mix/match sets available
• Domestic Parker hoses and fittings

Skid Steer Hydraulic Pallet Forks Frames are an excellent addition for anyone that owns a skid steer. No more jumping in and out of the skid steer to adjust the width of your fork tines, which can save you a lot of time in the loss of work productivity. It's used just like our heavy-duty pallet forks and frames but with the addition of hydraulically adjusted tines. This is a significant and much-needed advancement in the skid steer pallet fork and frame industry.

It's ideal for lifting pallets, loading lumber, or just about anything else. Our forks are 1 3/8 inches thick, 4 inches wide, and 48 inches long. They are completely heat-treated and rated to carry 4,000 lbs. We put a step on both sides of our frames so the operator could easily climb into the cab. Euro Style and John Deere mounts are available. 

Specifications

• Heat-treated American-made forks
• Rated to carry 4,000 lbs
• Optional 5,500 lbs capacity available
• Steps on both sides of frame
• 42", 48", 60", and 72" tines available
• Euro Style and John Deere mounts are available
• Optional name in grill

Anyone who owns a skid steer should have a set of Standard Duty Pallet Forks Frames. Forks are ideal for loading lumber, lifting pallets, or just about anything else you need. Our forks are 1 1/4 inches thick, 4 inches wide, and 42 inches long. They are heat treated and rated to carry 3,000 lbs. Cab access is easy with the step we install on both sides of our frames.

Specifications   

• Heat-treated American-made forks
• Rated to carry 3,000 lbs
• Steps on both sides of the frame
• 48" tines are available
• Euro Style and John Deere mounts are available

If you own a skid steer, you should have a Heavy Duty Walk Through Pallet Forks Frame set. Our walk-through frame does exactly what it says. Instead of having to climb around or over the fork back frame, simply walk through it. This added convenience will make jobs go faster and easier, whether lifting pallets, loading lumber, or just about anything else. Our forks are 1 3/8 inches thick, 4 inches wide, completely heat treated, 48 inches long, and rated to carry 4,000 lbs.

Specifications

• Walk-through design makes entering machines easier
• Heat-treated American-made forks
• Rated to carry 4,000 lbs
• Optional 5,500 lbs capacity available
• 42", 48", 60", and 72" tines are available
• Euro Style and John Deere mounts are available

Anyone who owns a skid steer should have a set of X-treme Skid Steer Pallet Forks Frames. X-treme Forks are ideal for lifting heavy pallets, loading lumber, or just about any other material. Our forks are 1 3/4 inches thick, 5 inches wide, and 48 inches long. They are thoroughly heat-treated and rated to carry 8,000 lbs. We have designed our X-treme Pallet Forks and Frames with a step on both sides of our frames so the operator can easily climb into the cab. Our pallet forks and frames come with a universal hookup. Euro Style and John Deere mounts are also available.

Specifications

• Heat-treated American-made forks
• Rated to carry 8,000 lbs
• Steps on both sides of the frame
• Euro Style and John Deere mounts are available
• Available sizes: 48", 60", 72"

The CID X-treme Power Rake provides a versatile tool for your skid steer attachments, in a manual or hydraulic version.  The X-treme Power rake will provide proper preparation of seedbed grading, leveling, and re-conditioning of multiple surfaces.  The X-treme Power Rake uses a 16-26 GPM motor inset within the drum.  This unique feature will decrease the risk of damage due to accidental collisions.  The X-treme Power Rakes bi-directional drum features carbide teeth and removable side plates which can be used front-facing or rear-facing.  The Rake’s floating design ensures the rake remains level during operation.

Specifications

• Inset Direct Drive Motor
• Carbide Teeth on Drum
• Solid Foam Filled Tires
• Bi-directional Drum
• Removeable Side Plates
• Hydraulic or Manual Angle Available
• Available Sizes: 72″, 90″

The X-treme Skid Steer Rotary Tiller is a perfect attachment for tilling gardens and small fields. It’s also great for deer hunters to use to make food plots with ease. These tillers have a bi-directional rotation and can till ground up to 6” deep. CID manufactures two configurations of skid steer rotary tillers.

We manufacture a low flow single parker motor x-treme rotary tiller that runs between 14 -20 GPM. CID has designed it to include bolt-on replaceable tines so you can get many hours of use out of your tiller. Our rotary tillers come in two different sizes which can be viewed in the specs below.

Specifications

• Bolt-on replaceable tines
• 1/4” plate, rolled housing. 3/8” sides with 3/8” thick shoes
• High Flow 20-40 GPM. Dual parker motors with internal relief valves and ¾” machine hose
• High Flow Sizes: 72″, 84″

The X-treme Skid Steer Rotary Tiller is a perfect attachment for tilling gardens and small fields. It’s also great for deer hunters to use to make food plots with ease. These tillers have a bi-directional rotation and can till ground up to 6” deep. CID manufactures two configurations of skid steer rotary tillers.

We also manufacture a high-flow x-treme rotary tiller with a dual parker motor system that runs 20-40 GPM. CID has designed it to include bolt-on replaceable tines so you can get many hours of use out of your tiller. Our rotary tillers come in two different sizes which can be viewed in the specs below.

Specifications

• Bolt-on replaceable tines
• 1/4” plate, rolled housing. 3/8” sides with 3/8” thick shoes
• Low Flow 14-20 GPM. Single parker motor with internal relief valve
• Low Flow size: 72″

The CID Hay Accumulator Grapple is one of our new products for 2016 and is a great addition to your attachment collection. It has a unique design. It allows one man in a skid steer to gather eight to ten square bales of hay. Then use the grapple to lift, load, and offload to a trailer. You can also use the hay accumulator to stack hay up in the fields for later pick up. It can also be used to stack hay in big barns or buildings.

With the hay accumulator grapple, there is no need for multiple pieces of equipment or additional manual labor. This is all operated from inside the skid steer using the Accumulator Grapple. This hay attachment is not only an easier way of gathering up hay. But can save you a lot of time and money. This will always be one of our top priorities is to save you the customer time and money.

Specifications

• 2 X 6 cylinder
• 9 Inch hooks
• Radial bearings
• Able to carry 8 to 10 square bales of hay
• Adjustable width sides

Our CID Hay Grapple Bucket is a large-capacity bucket with a grapple. It’s mainly used on a farm. It can be used for gathering broken bales of hay, straw, silage, and other light material. It can also carry a round bale of hay or multiple square bales of hay with this bucket.

It is a great bucket to have on your farm and can handle a lot of material for a reasonable price. If you are in need of a large capacity bucket but have no use for the grapples, we recommend our CID Skid Steer Poultry Litter Bucket. 

Specifications   

• 1/4″ wrap, 3/4″ x 6″ cutting edge
• 2″ x 10″ cylinders, grease fittings at every hinge point
• Optional bolt-on edge
• Gather up loose hay, carry round bales, or square bales

Our X-Treme Skid Steer Hay Bale Squeezer Attachment is great for anyone moving and stacking large quantities of hay on the farm or ranch. The X-treme hay bale squeezer supports twin cylinders whereas the heavy-duty hay bale squeezer supports only one cylinder. With the design of this hay bale squeezer, you can pick up wrapped hay bales without tearing or puncturing the plastic.

The two cylinders give the bale squeezer a stronger holding capacity and can stack two bales of hay at a time. The CID skid steer hay bale squeezer is also known as a “bale grabber” or “bale hugger” in the skid steer attachment and related industries. If you need to move or stack a lot of hay bales. The CID X-treme skid steer hay bale squeezer attachment is the one you will want to own.

It features twin 2.5″ x 10″ cylinders with a holding capacity of 2,800 lbs. This attachment can also stack two bales at a time and handles 4, 5, or 6-foot bales.

Specifications

• Twin 2.5 x 8 cylinders
• 2,800 .lbs lifting capacity
• Will lift 4’, 5’, And 6’ hay bales

Our Double Adjustable Hay Bale Spear is the best hay bale spear to have around the farm or ranch. The double adjustable bale spear with its unique design allows the spears to be adjusted to pick up 2- 4, 5, and 6-foot bales of hay and is rated at 2,800 lbs. per spear.

You can get a lot done on the farm with this very economical attachment. The hay bale spear is designed with two spears on top and four small tines on the bottom. Easily adjust the spears by flipping the clip up as you would on a pallet fork and just slide it to the correct width you need it set to. Double your efficiency by being able to move two round bales at once.

If you want to see the Double Adjustable Hay Bale Spear in action and our other hay attachments in action.

Specifications   

• 2,800 lbs. lifting capacity
• Designed to pick up 2- 4’, 5’, and 6’ bales
• Spears are adjustable
• Move two bales at once

Our Skid Steer High Back Hay Spears are designed to increase your leverage and safety when rolling the bale back toward the cab. High Back Hay Spears easily move bales of hay with a quick hook-up on your skid steer or tractor. The Hay Spears are rated at 2,800 lbs. We offer many different mounting options other than a universal skid steer.

We have three styles of high-back skid steer hay spears. The single high-back hay spear. The double high back hay spear and the triple high back hay spear. These high-back hay spears can carry round bales and square bales of hay, bermuda, fescue, alfalfa, native grass, and many more types of hay.

Specifications

• 2,800 lbs. weight rating
• We offer many different mounting options other than a universal skid steer
• High back increases leverage and safety
• Spear length 48″ overall
• Optional spear lengths

Our Skid Steer Concrete Bucket Attachment is designed for carrying and placing concrete using your skid steer. It allows you to accurately place concrete in areas inaccessible to trucks without any waste. It eliminates having to use a wheelbarrow and reduces manual labor. You can move this attachment around with ease. The concrete bucket attachment is perfect for pouring side walks, drive ways, and setting fence post.

Another great use with this skid steer cement bucket is pouring and setting up storm water run offs. On certain concrete jobs you need to shut the gate off quickly. This CID skid steer concrete bucket attachment can also be shipped with an optional hydraulic gate. For quickly opening and closing the gate without having to get in and out of your skid steer.

We offer three different sizes of Cid skid steer concrete bucket attachments. It comes available in a 1/2″,  3/4″, and 1-yard capacity. Comes with an optional hydraulic gate. 

Specifications

• 3/16″ material
• Chute extender
• 1/2″, 3/4″, and 1-yard city
• Optional hydraulic gate

Our Skid Steer Box Scrape Ripper is the perfect skid steer attachment for reconditioning gravel roads and driveways. The rippers will resurface the gravel that is buried in the ground over time.  While the cutting edges will smooth out and level the gravel.

This will save you from having to refill driveways with gravel every time it starts to settle. You can drive the box scrape forward or backward by simply removing the ripper tines and rotating them.

Specifications

• Replaceable and reversible cutting edges
• Replaceable ripper shanks

Our Skid Steer Ripper is great for penetrating the ground on farms, gardens, and driveways. You can easily prep a garden or till up some land with the CID skid steer ripper. It’s also great for loosening up hard-packed ground.

The tines on the ripper can be adjusted for more or less ground penetration. Alternative names for the ripper are tiller and field cultivator in the skid steer and related industries.

Specifications   

• Adjustable tines
• Available Sizes: 48″, 60”, 72”, 84”, 96″
• Optional finishing rake

The Standard Duty Skid Steer Rock Bucket is made from top-quality steel and is ideal for sifting out large rocks. It works great in pastures, lawns, or construction sites, and will catch any rock or piece of debris that is larger than 3” spaced tines. The rock bucket uses 3/8″ thick tines and is built for machines using 35-45 horsepower.

Specifications

• Fully welded teeth
• 3/8″ tines
• 3″ spacing
• Available Sizes:  60″,  66″ 72”, 78”, 81″, 84″

The CID High Capacity Snow Bucket was built to handle large volumes of material. This bucket has viewing slots in the back, allowing a line of sight with the edge. With a 31″ height and 41″ depth, the high capacity bucket will save you more time and make transportation of light material more efficient. The bucket is constructed of 3/16th” steel with a 3/4 x 6 cutting edge. Optional Bolt on edge is also available.

Specifications   

• Available Sizes: 72”, 78″, 84″, 96″, 108″, 120″
• Slotted back plate for edge view
• Optional bolt-on edge

Bigger is better with our CID X-treme Skid Steer Rock Buckets. With the CID skid steer rock buckets, you can sift through tons of dirt and gather lots of rocks and stones leaving your dirt ready for grading or other things. It can also be used for cleaning up and general use. The rock buckets come with 3” tine spacing, 3/8” tines, and dual 1 ¼” rods to reinforce the 5” tall rock dam. With all that said it is a very durable rock bucket!

Our x-treme rock bucket also has fully welded front tines in place of cutting edge. The rock buckets can be made to work with your skid steer loader or wheel loaders as some call them. They will also work with compact track loaders and compact tractors by building them with the correct mounting plate.

Specifications

• Fully welded front tines
• 3” tine spacing
• Dual 1 ¼” rods to reinforce the 5” tall rock dam
• Available Sizes – 66″, 72″, 78″, 81″, 84″

The Heavy Duty Low Profile Bucket is ideal for moving material. It is also great for digging and grading dirt or gravel. The low profile bucket is made for up to 65 hp track machines and up to 70 hp on-wheel machines. The X-treme duty package option is made for up to 110 hp machines and can be viewed in the specs. 

Specifications   

• Optional weld-on teeth
• Optional bolt-on edge
• X-treme Duty package offered (1/4″ wrap 1″ x 8″ edge) 1/2″ side edge & wear bars
• 3/16″ bucket wrap
• 3/4″ x 6″ edge
• 3/8″ wear bars
• Available Sizes: 63”, 66”, 72”, 78”, 81”, 84″, 90″, 96″

The Snow & Litter Bucket is ideal for lifting large volume, low-weight material such as snow, mulch, manure, sawdust, shavings, and any other type of loose or light debris. The CID snow & litter bucket is made for up to 65 hp track machines and up to 70 hp on wheel machines. Our snow & litter bucket also has an X-treme duty package option that is made for up to 110 hp machines.

Specifications

• Designed for large volume, low weight material
• An optional bolt-on edge is available
• X-treme Duty package offered (1/4″ wrap 1″ x 8″ edge) 1/2″ side edge & wear bars
• 3/16″ bucket wrap
• 3/4″ x 6″ edge
• 3/8″ wear bars
• Available Sizes: 54″, 60″, 63”, 66”, 72”, 78”, 81”, 84″, 96″, 108″

The Heavy Duty Skid Steer Rock Bucket is made from top-quality steel and is ideal for sifting out large rocks. It works great in pastures, lawns, or construction sites, and will catch any rock or piece of debris that is larger than 2-3/8”. The rock bucket comes standard with a 3/4 x 6 cutting edge and is upgraded to a 1 x 8 edge when optional teeth are added.

Specifications   

• 3/4 x 6 cutting edge
• Optional weld-on teeth with 1 x 8 cutting edge
• 3/8″ sides
• Available Sizes:  63”, 66″ 72”, 81”, 84″

Our Skid Steer Concrete Bucket Attachment is designed for carrying and placing concrete using your skid steer. It allows you to accurately place concrete in areas inaccessible to trucks without any waste. It eliminates having to use a wheelbarrow and reduces manual labor. You can move this attachment around with ease. The concrete bucket attachment is perfect for pouring side walks, drive ways, and setting fence post.

Another great use with this skid steer cement bucket is pouring and setting up storm water run offs. On certain concrete jobs you need to shut the gate off quickly. This CID skid steer concrete bucket attachment can also be shipped with an optional hydraulic gate. For quickly opening and closing the gate without having to get in and out of your skid steer.

We offer three different sizes of Cid skid steer concrete bucket attachments. It comes available in a 1/2″,  3/4″, and 1-yard capacity. Comes with an optional hydraulic gate. 

Specifications

• 3/16″ material
• Chute extender
• 1/2″, 3/4″, and 1-yard city
• Optional hydraulic gate

The CID skid steer 4-in-1 bucket are very versatile attachments for your skid steer and are ideal for grappling, dozing, backfilling, loading, digging and fine grading. The 4-in-1 bucket is also known as the combination bucket to some people in the skid steer attachments and related industry.  CID offers multiple sizes in 5x different horsepower classifications.

The cylinders on our Compact Tractor 4-in-1 Combination Buckets are  2” bore. The cylinders on our Standard Duty & Heavy Duty 4-in-1 Combination Buckets are 2.5” bore. They are equipped with a 1/2” x 6” cutting edge and ½” x 4” at all other ground engaging points.

Our X-treme 4 N 1 Buckets have cylinders with are 3” bore. They are equipped with a 1” x 8” cutting edge and ¾ ” x 6” at all other ground engaging points.

New to the line up, our Severe Duty 4-N-1 features replaceable rear edges, and has been designed for machines with Horsepower of 80 an higher.

Skid Steer 4-in-1 Bucket Attachment Specs

The 4 in 1 bucket are also built with top quality steel, over sized pins and bushings, with grease fittings at every pivot point. Every unit exceeds the lifting capacity of the skid steer machine it is used on.

• 2” bore cylinders on the Compact Tractor.
• 2.5” bore cylinders on the Standard Duty & Heavy Duty.
• 3” bore cylinders on the X-treme.
• Grease fittings at every pivot point.
• Optional weld on teeth.
• Optional bolt on edge. (HD & XD).
• Optional side cutter. (HD & XD).
• Compact Tractor sizes: 48″, 54″, 60″ (under 40 hp).
• Standard Duty Sizes: 60”, 66”, 72” (40 – 50 hp).
• Heavy Duty Sizes: 63”, 66”, 72” ( 50 – 65 hp).
• X-treme Sizes: 72”, 78”, 81”, 84” (65-80 hp).
• Severe Sizes: 72″, 78″, 81″, 84″ (80 hp & Over

Similar to the Prime Lo Pro Extreme Duty Dirt Bucket, the Super Duty Tooth Bucket features a total of 1/2″ bucket thickness on the sides (see pictures for reference). Our under strap supports are 1/2″ by 3″ and we run 6 of them. The Super Duty Dirt Bucket is fabricated with your choice of either 3/16” or 1/4″ thick steel. We add the weld on replaceable teeth for digging performance.

Features

• 3/16” or 1/4“ bucket material available
• 1/2" fully welded on cutting edge (better for digging)
• Universal quick attach plate

Effortlessly remove rocks and logs with a commercial-grade Prime Rock Bucket. Unlike most other rock buckets on the market, our Prime Rock Buckets feature bolt-on removable end plates and reinforced outside tines.

The bucket’s tines are spaced 3” apart, allowing the user to remove both small and large objects, shortening the time needed to complete your project. This attachment does not utilize a grapple. 

Features

• Universal quick attach plate
• Bolt-on removable side plates
• Reinforced outside tines
• Commercial-grade steel

Specifications

• Common Sizes: 62”,68”,74",78" and 84"
• Spacing between tines: 3"
• Tine width: 3/8"
• Side plate width: 1/2"
• Cutting edge width: 1/2"

The X-treme and Heavy Duty Demo Dozer Attachment combines multiple functions in one unique attachment.  The Demo Dozer replicates the functions of a general-purpose bucket, 4-N-1 bucket, dozer blade, grapple bucket, clamshell, log handler, and demolition bucket.  The Demo Dozer is also equipped with tool receivers, pre-drilled holes for bolt-on edges, chain hooks with pins, and removable sides. It can handle more material and is intended for larger machines (65 HP and Up) than our Heavy Duty Skid Steer Grapple Bucket.

Specifications

• 2” bore by 10” stroke cylinders that operate independently, rated at 4000 PSI
• HD has 1/2″ top tines, XD has 5/8″ top tines
• Hydraulic lines on top & routed inside the tubing to prevent tears
• Rod Covers are included with Xtreme, optional on HD
• Bolt-on sides included.
• The bucket has a 1” x 8” cutting edge.
• Optional bolt-on edge
• Available Sizes: 66”, 72”, 78”, 81″, 84”, 96”
• Heavy duty designed for HP of 45-65, Xtreme designed for 65+

Our Skid Steer Multi Purpose Angle Blade is different from most. Our engineers have designed this Multi-Purpose Angle Blade to become a snow plow and angle blade with ease. To use this as a snow plow, simply remove the center pin. This allows the blade to tip when hitting something. Our powerful springs retract the blade into position as soon as the object is cleared.

To use as an angle blade, leave the center pin in, and you are ready to move loose gravel or soil. This is also known as a 4-way angle blade. It moves up and down from your skid steer, and side to side from the attachment.

Our angle blades have ½” thick 6” wide replaceable bolt-on cutting edges. The blade comes with two 3” bore 6” stroke cylinders, couplings, and hoses so the attachment is ready to use when it is received.

Specifications   

• Operates as a snow plow or angle blade
• Constructed with ½” thick by 6” wide replaceable AR400 bolt-on cutting edges
• 3” bore 6” stroke cylinders
• 3/16″ moldboard
• Available Sizes: 72”, 84”, 96”, 108″, 120″

The CID Skid Steer Forestry Disc Mulcher 44” is the newest edition to our cutter line-up. This forestry disc mulcher features a 44” diameter cutting area, and a machined and statically balanced disc. The Mulcher can mulch 4”. Available with two motor combinations, a 100 CC 20-30 GPM, or a 150 CC 30-44 GPM. The disc holds a total of 30 mulching teeth, easily providing the muscle for your toughest clearing needs.

Specifications

• 44″ diameter disc - no welding
• 100 CC motor requires 20-30 GPM
• 150 CC motor requires 30-44 GPM
• 3/8″ deck and sides allow for below-ground cutting
• Teeth on all surfaces, deck, and sides
• 1″ hinged deflector plate
• Larger trees can be vertically mulched quickly
• Nimble and easily maneuvered

The CID Skid Steer Forestry Disc Mulcher is the newest addition to our lineup of cutters. With a robust 60” diameter fully machined disc, there is no job too tough to tackle. Mulches 6” material in a matter of seconds and cuts 14” diameter trees like it is nothing. This is a great forestry attachment to have in land management and the forestry industry.

The Skid Steer Disc Mulcher can thin an area in no time. After cutting your area you can back drag across the ground to mulch up the cut material and ground down stumps flush with the surface. We offer two different sizes of motors to run on different sizes of skid steers. Our disc mulcher also has a deflector that slows down the material while it is exiting the cutter. The teeth are located on the top, side, and bottom of the disc.

Specifications   

• 60” fully machined disc – no welding on disc
• 150cc motor requires 32-44 GPM, 3200-5000 PSI
• 200cc motor requires 45-60 GPM, 3200-5000 PSI
• 3/8″ thick deck & reinforced sides
• Teeth on the top, side & bottom of the blade
• 1″ thick hinged deflector
• Throws material away from the machine
• Allows below-ground cutting

The CID Hydraulic Breakers are the perfect attachment for rock, asphalt, or concrete demolition. Our Hydraulic Breakers are available in eight different models suitable for mini-skid steers, skid steers, compact loaders, and mini-excavators.    CID also offers a variety of working tools for your Breaker: Cone points, Cross cut asphalt cutters, Inline Asphalt cutters, Asphalt cutters, Tamping tools, and Post drivers.

Model Specifications

• Longer Chisel Point and larger through bolt for added durability
• Stronger impact power, low noise design
• Control valve replaceable with ease and speed
• All Breakers include: Mount, Hoses, Moil Point, Blunt Point, Tool Kit, Nitrogen Gauge, and Operator’s Manual
• Two Year Warranty (Wear parts excluded)
• Auto Lube standard on four models, CBR1000 and above
• Additional Tool Tips available